How To Fix Apple Watch Not Unlocking iPhone.Apple watch not unlocking iphone : how to Fix.
Apple Watch won’t unlock your iPhone? There are many reasons for this, such as Bluetooth and Wi-Fi problems, outdated system software, and corrupted network settings.
Work through the suggestions and solutions below to get Apple Watch to unlock iPhone again.
Before You Start
Although Apple Watch Unlock is enabled on your iPhone, this feature will not work if you:
do not wear your Apple Watch. watchOS uses wrist detection to detect this. Manually unlock your iPhone every time you strap on your Apple Watch. Don’t forget to unlock your Apple Watch.
Double-Check Bluetooth and Wi-Fi
Your Apple Watch and iPhone use Bluetooth and Wi-Fi to communicate with each other. Therefore, the best place to start is by making sure the Bluetooth and Wi-Fi radios are turned on and working on each device.
Swipe down from the top-right corner of the screen to open the iPhone Control Center. Then make sure the Bluetooth and Wi-Fi icons are active. If not, click to activate them.
Press the Digital Crown and select Settings (gear-shaped icon). Then scroll down and tap Bluetooth & Wi-Fi. If the switches on the following screens are grayed out, turn them on.
Toggle Airplane Mode
Switching Airplane Mode on your iPhone and Apple Watch helps reboot the Bluetooth and Wi-Fi radios inside. This is a quick way to fix any random crashes preventing devices from communicating with each other.
1. Open iPhone Control Center and turn off Bluetooth and Wi-Fi. Then touch the airplane mode icon and wait 10 seconds before touching the icon again. Then reactivate Bluetooth and Wi-Fi.
Go to the Settings app and turn off Bluetooth and Wi-Fi. Then go to the watch face, swipe up to open Control Center, and then activate and deactivate airplane mode. Finally, go back to the Settings app and reactivate Bluetooth and Wi-Fi.
Restart iPhone and Apple Watch
The next fix involves restarting both devices. This clears up system caches and helps resolve other software-related glitches that prevent Apple Watch from unlocking iPhone.
Open the Settings app and tap General> Shut Down. Then drag the Slide to Power Off slider to turn off the device. Wait 10-20 seconds before holding the side button to restart it.
Press and hold the side button and drag the Power Off slider to turn off the device. Then wait 10-20 seconds and press the side button again to restart it.
Disable/Re-enable Unlock with Apple Watch
If Apple Watch still can’t unlock your iPhone, try deactivating and reactivating Unlock with Apple Watch. Setting up a feature from scratch may help solve the problem.
To do this, open the iPhone Settings app, tap Face ID & Passcode, and enter the passcode to lock the iPhone screen. Then scroll down to the Unlock with Apple Watch section and turn off the switch next to Apple Watch [your name].
Then restart your iPhone and Apple Watch, go back to the Face ID and password settings on your iPhone, and reactivate unlocking with your Apple Watch.
Reset Face ID on iPhone
Since Face ID is closely related to Unlock with Apple Watch, your next solution is to reset your Face ID profile.
To do this, open the iPhone Settings app and select Face ID & Password. Then enter your device password and tap Reset Face ID.
Finally, restart your iPhone, re-enter your Face ID and password settings, and click Set Up Face ID to set up your Face ID profile from scratch.
Reset Passcode on Apple Watch
If Unlock with Apple Watch still doesn’t work, try resetting your Apple Watch password. To do this, open the Watch app on your iPhone and tap Password. Then click Disable Password to remove the password from your Apple Watch. Then click “Enable Password” to set the password again.
Note. Resetting your Apple Watch password has disabled the Unlock with Apple Watch feature, so be sure to reactivate it by visiting the Face ID and password settings on your iPhone.
Update iOS and watchOS
Updating iOS and watchOS can help eliminate known system software issues due to Apple Watch Unlock interference. For example, Apple has acknowledged an issue on iPhone 13 that results in the “Unable to contact Apple Watch” error. The recommended fix is to update to iOS 15 and watchOS 8.
Open the Settings app and go to General> Software Update. If you see a pending iOS update, click Download and Install.
Place Apple Watch in the charger. Then press the digital crown and go to Settings> General> Software Update. If you see a pending watchOS update, click Download and Install.
You can also open the Watch app on your iPhone and tap General> Software Update> Download & Install to update your Apple Watch.
Reset the iPhone’s Network Settings
Damaged or conflicting network settings on your iPhone can also play a role in preventing your Apple Watch from unlocking. So dropping them is a good idea.
To do this, open the iPhone Settings app and go to Settings> General> Transfer or Reset iPhone Settings. Then click “Reset Network Settings”.
Backup and Reset Your Apple Watch
If the problem persists or recurs intermittently, consider resetting your Apple Watch. This is the best way to fix basic watchOS issues.
To do this, open the Watch app, select All Watches (in the upper-right corner of the My Watch tab), tap the Info icon next to Apple Watch, and tap Unpair Apple Watch. Then, your iPhone will back up and reset your watchOS device.
After that, proceed by reconnecting your Apple Watch to your iPhone. You will be able to restore data during the setup procedure.
Detailed step-by-step instructions can be found here on how to back up and restore your Apple Watch.
Backup and Reset Your iPhone
If none of the above fixes helped, it’s time to factory reset your iPhone. Just be sure to back up your data so you can restore everything after the reset procedure. Also, don’t forget to set up “Unlock with Apple Watch” after that. Hope this fixes the problem for good.
How To Fix Apple Watch Not Unlocking iPhone
How To Fix Apple Watch Not Unlocking iPhone
Apple watch not unlocking iphone : how to Fix