how to connect wii to smart tv

how to connect wii to smart tv or how to connect wii to tv with hdmi.The Wii was one of the most popular home consoles of all time. It came out in 2008 and has AV connections for connecting a Wii console to a TV. However, newer TVs with many different connection types can get you a lot of confusion if you want to play your Wii on it.how to connect wii to tv with component cables.

Regardless of the type of TV you are using, there is likely a way to connect your Wii to it. You may just need to find different types of cables than you already have.

In the sections below, you will find instructions on how to connect the Wii using different types of cables, as well as any additional steps that may be required depending on the cables you are using.

Connect the Wii to a TV using AV Cables

Here’s how to connect your Wii to your TV using the AV cables that come with the system.

Find the set of 3 inputs on the TV, which should be yellow, white and red. They can also be tagged as video and audio. These are your AV inputs.

Insert the color-coded AV plugs to match the color of the input on your TV. Yellow = video, white = audio on the left or mono, red = audio on the right

On the back of the Wii is the AV Out connector at the opposite end of the AV cable where you will plug it.

Turn on the TV and find the selected input on the remote control or on the TV. This can be seen as Input Select, Input, or TV / Video. Then select AV to watch your Wii. They may be labeled slightly differently depending on your TV, such as AUX or EXT. He can also be on channel 00 or 99.

Connect the Wii to a TV using component cables

As far as component cables are concerned, the steps for setting them up with Wii are basically the same as with AV cables

Your TV must have a set of 5 ports if it supports component cable connections. These ports should be two audio ports colored red (right or R) and white (left or L), and three video ports colored red (Pr / Cr), blue (Pb / Cb) and green ( Y).

Connect the appropriate colored component cables

Connect the cable to the back of the Wii through the AV Out port.

Next, you need to turn on progressive scan if your TV has one.

Turn on the Wii, find the TV input and switch it to view the AV input.

Connect Wii to TV using HDMI

The original Nintendo Wii sadly lacks an HDMI port. However, this does not necessarily mean that you cannot play it on a TV with HDMI inputs exclusively.

There are many adapters that allow you to connect your Wii to the HDMI port by plugging it directly into your console. This makes it easy to use adapters such as the Portholic Wii to HDMI Converter.

Connect the HDMI adapter to the back of the Wii. Then plug the HDMI cable into the adapter.

Find the HDMI port on your TV, usually at the back or sides. Connect the other end of HDMI

Turn on the Wii and find the selected input on the TV. Select the HDMI input to which you connected the cable.

Connect the Wii to the TV with the SCART connector

On the other hand, if you have an older TV with SCART connectors that you want to connect your Wii to, that can be done too. SCART connectors also connect to some splitters, giving you the ability to use more ports if needed.

As TVs that support SCART connections become more and more obsolete, these connectors and adapters are few and far between. However, you can still buy a SCART adapter that will connect to your Wii, such as this one

Here’s how to use the Wii to TV adapter:

Connect the Wii RCA cables (AV cables</a to the yellow, red, and white end of the SCART adapter. with caps of the same color.

Connect the SCART to your TV or splitter. Then change the TV input to view through that connection.

Connect Wii to Any TV

With all these connections available, you should be able to connect your Wii to any TV. And the last thing you should keep in mind is that the Wii only outputs a maximum resolution of 480p, so don’t expect to get more out of that on your new TV.

You may also need to change your Wii settings to match the screen of the TV it is connected to. On Wii, you can go to Settings> Wii Settings> Display to reposition the screen and change the resolution to EDTV or HDTV for 480P output.

You can also go to the wide mode setting and change the setting from standard (4: 3) to wide (16: 9) or vice versa.